|
Post by mixyblob on Jan 24, 2023 18:57:28 GMT
I've only just rejoined this forum after a 3 year hiatus and I'm looking at the list of threads and more importantly the dates of those threads. I don't hold up much hope of any replies to my query but here goes. I've just set up a nestbox with a wired IP camera using a translucent roof to provide lighting during the day and IR leds for night. I'm viewing the camera through the Xmeye app on my Android phone and the picture is excellent. My problem is, I can't get the motion detection and recording feature to work. The app doesn't seem to ask where such videos/ pictures are stored. I've set up a detection zone etc and adjusted all the right settings (I think). Is motion detection even possible with Xmeye and if so how do I set it up? Regards Jim
|
|
ninro
New Member
Posts: 1
|
Post by ninro on Jan 12, 2024 17:50:23 GMT
Hi I use same setup. Discovered the same problem as you. Xmeye app can only do motion detections if the camera has an sd card on board. Like yours mine don't. I have my poe switch connected to pc and that's where I record motion detections. If you use xmeye on a dedicated nvr I think, not sure, that you can link it to the xmeye app and see motion detections that way.
Hope that helps.
|
|