Post by pete11 on Feb 14, 2022 14:00:04 GMT
Thanks Matt.
My next technical issue is now presenting itself: recording the streams from both cameras together on Raspberry Pi looks as if it demands a bit too much bandwidth for the powerline adaptor to handle ...so intermittent noise on video images on both cam feeds. Just recording the wifi cam only (1080p/8fps) is fine (whereas the new cam from gardennature seems to be 2K 3MP (2304x1296P) @ 20fps which adds quite an overhead)
Unless it's something to do with packing the 48vdc POE adaptor for the new box/cam very close next to the access point, bundled together in the same waterproof box - interference perhaps?
On the plus side: a flurry of BT activity this morning including a couple of double visits to the tree box (wifi cam)
And also male BT had a quick cling onto the entrance of the new box and brief peek in.
My next technical issue is now presenting itself: recording the streams from both cameras together on Raspberry Pi looks as if it demands a bit too much bandwidth for the powerline adaptor to handle ...so intermittent noise on video images on both cam feeds. Just recording the wifi cam only (1080p/8fps) is fine (whereas the new cam from gardennature seems to be 2K 3MP (2304x1296P) @ 20fps which adds quite an overhead)
Unless it's something to do with packing the 48vdc POE adaptor for the new box/cam very close next to the access point, bundled together in the same waterproof box - interference perhaps?
On the plus side: a flurry of BT activity this morning including a couple of double visits to the tree box (wifi cam)
And also male BT had a quick cling onto the entrance of the new box and brief peek in.